Canon QT5-0385-V01 - Manual (Page 44)

Troubleshooting
40
Problem Possible Cause Try This
Printer Does Not
Start or Printer
Stops During
Print Jobs There may be
problems with your
operating system Restart your computer. It may solve the problem.
Delete an undesired print job, if there is any. Use
Canon IJ Status Monitor in
Windows or Printer Setup Utility (or Print Center) in Macintosh for the deletion.
1. Open the printer properties dialog box.
See “Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu Opening the Printer Properties Dialog Box Directly from the Start Menu”
on page 29.
2. Click the Maintenance tab and then View Printer Status.
3. Click Display Print Queue.
4. Select Cancel All Documents in the Printer menu.
In Windows XP and Windows 2000
The print jobs may not be selected.
5. When the confirmation message is displayed, click Yes.
The print job is deleted.
In Windows Me and Windows 98
Click to select an undesired document and select
Purge Print
Documents in the Printer menu.
1. Select Applications from the Go menu.
2. Double-click the Printer Setup Utility icon in the Utilities folder.
When using Mac OS X v.10.2.8, double-click the Print Center icon.
3. Double-click the name of your printer displayed under Name in the Printer List.
4. Click to select an undesired document and click .
The print job is deleted.
Cannot Print to
End of Job Incorrect page size
is selected Ensure that the page size setting matches the size of the paper loaded in the
printer:
Check the Page Size setting from within your application to ensure that it
matches the size of the paper loaded.
Check
Page Size on the Page Setup tab in the printer properties dialog box of
the printer driver (Windows) or the Page Setup dialog box of the printer driver
(Macintosh) to ensure that it matches the size of the paper loaded.
The size of the print
data is too large
Check the size of the print data. For Windows XP and Windows 2000, if the size of
the data is too large, part of it may be lost. When the spool format is EMF, follow
the procedure below.
1. Open the printer properties dialog box.
2. On the
Page Setup tab, click Print Options.
3. Select the Reduce spool data size check box, and click OK.
When Reduce spool data size is set, the print quality may be
degraded.
Performing
automatic duplex
printing Select Use reduced printing in the printer driver. It may solve the problem.
Print layout may be altered with the reduced printing function.
1. Open the printer properties dialog box.
2. Click
Print Area Setup in the Page Setup tab and select Use reduced printing.
1. In the Print dialog box, select Duplex Printing & Margin from the pop-up menu.
2. Select Automatic Duplex Printing, and select Use reduced printing in Print
Area.
iP6700D_QSG_US.book Page 40 Thursday, April 13, 2006 11:10 AM