Photogenic Professional Lighting Radio Sync PowerLight - Manual (Page 17)

17
Radio-Sync not working. Probable causes:
1. Transmitter...wrong channel or batteries or connection to camera or defective.
2. Built-in receiver...wrong PowerLight model or defective.
SERVICE
The photographer should not attempt to make repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service agent. This
will provide you safety, insure proper operational functions and provide continuation of
your warranty.
For replacing the flashtube or modeling lamp, follow the directions and specifications
given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always unplug your
PowerLight and discharge the stored energy by pressing the “test” button. Wait
approximately two hours for the main capacitors to deplete any residual stored
wattage. Never place your fingers or any metal objects into the flash or
modeling sockets. Contact with high voltage may result.