Photogenic Professional Lighting Radio Sync PowerLight - Manual (Page 9)

9
SPECIFICATIONS
PLR300DR, PLR1250DR & PLRX1250DR
General:
Flash Power PLR/X1250DR.................16 to 500 watt-sec., 6 f-stops
Flash Power PLR300DR.......................4 to 125 watt-sec., 6 f-stops
Flash Duration PLR/X1250DR.............1/1300 second at Full
1/640 second at 1/32
Recycling time.......................................0.5 to 1.5 seconds
Power Control........................................Full to 1/32 range.
(6 f-stops)
0.1 f-stop resolution.
Digital Display Accessory
Modeling Light Power ..........................250 Watt Quartz, ESS
Modeling Light Control ........................Full to 1/32 range.
0.1 f-stop resolution.
Line voltage regulated.
Triggering .............................................Built in Photoslave.
Push to Test button.
Sync Jack. (12 volt)
Built-in Radio-Sync.
Main Supply PLR300/1250DR ............105-125 VAC, 60 Hz, 10 amp.
Main Supply PLRX1250DR ................130 VAC, 50 Hz, 10 amp.
Consumption ........................................0.2 amps idling,
5 amps charge (30A peak).
Voltage Stabilization ............................Plus or minus 0.05 f-stop.
Fuse, external PLR300/1250DR...........16A, SLO-BLO, 3AG type
Fuse, external PLRX1250DR................8A, SLO-BLO, 5 X 20mm.
Packaging .............................................Extruded Aluminum case.
Weight PLR300DR...............................5 pounds
Weight PLR1250DR.............................5 pounds, 8 ounces.
Weight PLRX1250DR..........................6 pounds.
Dimensions PLR300/1250DR (case)....4.5” x 4.5” x 6.75”
Dimensions PLXR1250DR (case)........4.5” x 4.5” x 8.75”
Flashtubes and Modeling Lamps:
Flashtube ..............................................Plug-in style, use only
Photogenic’s Standard C4-15
or C4-15C, C4-15D or C4-15F.
Modeling Lamp ....................................250-Watt Quartz Halogen, ESS.
150-Watt Quartz Halogen, ESP.
100-Watt Quartz Halogen, ESR.