Reloop JOCKEY 3 REMIX - Manual (Page 29)

29
ENGLISH
4.2.2 Inputs
Inputs 1 and 2 can be routed to the software (SW) or Master Output (Mix) via the Routing Switches -F49- and -F50-. The Off position will turn off
the inputs.
example routing for In1:
IN1 = SW
The signal of Input 1 will now be routed to the Input Channels 1 and 2. For this purpose Traktor Pro 2 has to be configured correctly.:
First the correct inputs for the corresponding deck have to be selected. In this example deck C is used as analog channel.
In order to make the signal become audible via Master, the deck has to be switched to Live Input.
In order to operate the signal via the mixer the Deck Select Switch has to be put to C.
By using this routing option the input signal can be enhanced with the internal Traktor effects.
IN1 = Mix
If the Input Routing is switched to MIX, the input signal will be routed directly to the mixer. If the Deck Select Switch -T31- is switched to IN1 both
decks A and C in Traktor are mute. Only the analog signal is audible.
IN1 = Off
IN1 is switched to mute.
4.3 Analog Mixing Function
The Jockey 3 Remix can also be used as 2 channel mixing console without the necessity to involve a computer.
To do so both Deck Select Switches -T31- have to be switched to IN1 and IN2 respectively. Both Routing Switches -F49- and -F50- have to be
switched to MIX.
Depending on which sources are connected to the Jockey 3 Remix -B66-, -B67-, it is possible to switch each deck to phono (turntables) or line
(CD-players) -B65-.
Via the Cue Buttons -T34- it is possible to monitor the signal on each side. Via the Cue Mix Fader -T40- it is possible to simulate a mix through
your headphones.