Reloop WAVE 8 - Manual (Page 7)

7
ENGLIS
CH
APPlIcATIon In AccoRdAnce WITh ReGUlATIonS
- This device is an active loudspeaker which amplifies and plays low level audio signals.
-
This product is authorised for connection to 100-120V, 60 Hz / 230 V, 50 Hz AC and is designed exclusively for indoor application.
-
If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to
exclusion of warranty rights. Moreover, any other application that does not comply with the specified purpose harbours risks such as short
circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the warranty rights.
MAInTenAnce
- Check the technical safety of the device regularly for damage to the mains line or the casing, as well as for wear of wear parts such as
rotary and sliding switches.
- If it is to be assumed that the safe operation is no longer feasible then the device must be disconnected and secured against accidental use.
Always disconnect mains plug from the outlet!
-
It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no longer functions, following
longer storage under unfavourable conditions or after major transport stress.
conTRol eleMenTS
designation
1. Volume Dial
2. Stand By/Mute Button
3. Input Select Button
4. Power Status LED
5. Input Status LED
6. Signal Input (XLR)
7. Signal Input (6.3 mm jack)
8. Signal Input (RCA)
9. HF Trim Switch
10. Acoustic Space Switch
11. LF Cutoff Switch
12. Input for External Wave Control
13. Link Connection for 2nd Speaker (3.5 mm jack)
14. Volume Dial
15. Input Select Switch
16. ON/OFF Switch
17. Voltage Selector Switch
18. Mains Connection
18
5
17
16
12 13
14
9
7
6
8
11
15
10
1
4
2 3