Casablanca Fan Company Inteli-Touch 3 PN - Manual (Page 4)

4
CAUTION: To reduce the risk
of personal injury, use only the
mounting hardware provided
with the approved outlet box
to install the crossbar mount-
ing bracket.
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
WASHER
GREEN
GROUND
WIRE
CEILING
FAN
APPROVED
OUTLET
BOX RIDGE
SIDE
DOWN
CANOPy LOCk
WASHERS
CANOPy
SCREWS
CROSSBAR MOUNT-
ING
BRACKET INSTALLED
CANOPy
CANOPy CANOPy
HATCH
OUTLET BOX
MOUNTING
HARDWARE
Note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
Proceed with installation as follows:
Step 1. Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the
bracket, with ground wire and ridges down, to the ceiling
fixture outlet box with the mounting hardware included with
the outlet box.
Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.
Step 2. Attach the canopy to the crossbar mount-
ing bracket with three of the 8-32 x 2 1 / 4
″ long
canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.
BODy TOP
COVER GLASS SHADE
CANOPy LOCk WASHER (4)
HALOGEN BULB
100 WATT
CANOPy SCREW
(4)
CANOPy INSTALLATION
CANOPy/GLASS HARDWARE
CROSSBAR MOUNTIING BRACKET INSTALLATION