Cal Flame 3000 - Manual (Page 40)

Natural Gas Requirements Owner’s Manual
Page 39 Owner’s Manual
NATURAL GAS REQUIREMENTS
Natural Gas Requirements
Always check the rating plate to make sure the gas supply you are hooking up to is the gas type the grill is
manufactured for.
IMPORTANT WARNING: All Cal Flame grills are manufactured with the highest regard to
safety. For this reason, Cal Flame grills are either manufactured to
operate on Liquid Propane (LP) or Natural Gas (NG) and
cannot be converted. To verify the grills operating fuel, remove the
bottom drip pan and check serial number label on the left. Either LP
or NG will be marked on the operating tab, indicating the proper
operating fuel.
Attempting to convert Cal Flame grills from one fuel to another may
result in serious injury and void the warranty coverage.
IMPORTANT: Never connect the grill to an unregulated gas supply.
The installation of this appliance must conform with local codes or, in the absence of local codes, to the
national fuel gas code, ANSI Z223.1a-1998. Installation in Canada must be in accordance with the standard
CAN/CGA-B149.2, Propane Installation Code.
NATURAL Gas Connection: (Must be performed by a licensed contractor or local gas company representative).
Ensure that the service supplying the grill is fitted with a shut off valve conveniently positioned to the grill and
giving ease of access.
Your Cal Flame Grill for use with Natural Gas comes equipped with its own regulator which MUST NOT be
removed. If, this regulator needs to be replaced use only the type specified by Cal Flame for this appliance.
1. Remove the rear panel from the BBQ to gain access to the regulator and gas connection point.
2. Connect a suitable flex connector to the grill regulator.