SCHOEPS Double MS Tool BF (2012) - Manual (Page 2)

Double MS Plugin Installation, Setup and Userguide
Setup and Routing
Logic Pro 9
1. Once you set up your Session containing
the three raw double MS tracks, go to the
mixer and create a new aux channel in
Surround format. You can directly assign
your surround output. This will later be the
processed output of the Double MS plugin.
2. Set the input of the aux strip to a bus of your choice.
3. Assign the outputs of all three raw channels to the bus you used in the
previous step.
4. Now set the pannings of the three channels to exactly these Values:
• Front: Angle -30°, Diversity 0
• Side: Angle +30°, Diversity 0
• Rear: Angle 0°, Diversity 0
2
Double MS Tool BF Installation, Setup and Userguide