Sound Devices PIX 250i - Manual (Page 10)

PIX 250i User Guide
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
4
Panel Descr
ip
tions
6) Digital Audio Input/Output (DB-25)
8 channels of AES digital audio input and
8 channels of AES digital output. Out-
puts configured with Setup Menu option
[Audio - Line Output]. ( See “Connector Pin
Assignments”, page 71 )
7) Analog Audio Outputs (XLR)
2 channels of balanced, line-level analog
audio outputs. Same signal as DB-25 Ana-
log Audio outputs channels 1 and 2.
8) Analog Audio Inputs (XLR)
2 channels of balanced, line-level analog
audio inputs. If both XLR and DB-25
signals are connected, the signal will be
combined.
9) Ethernet (RJ-45)
Attaches to 1G or 100M Ethernet net-
works. Provides Network Grouping ( See
“Network Grouping”, page 41 ), web ac-
cess for remote control ( See “Web Interface
- PIXNET”, page 44 ), and network file
service. ( See “Storage and File Manage-
ment”, page 53 )
10) RS-422 Control (DB-9)
Connects to RS-422 Controllers for exter-
nal control of the PIX 250i. ( See “RS-422”,
page 44 )
11) GPIO Remote (Phoenix 10-pin)
Logic contact points for remote control.
( See “GPIO (General Purpose Input / Out-
put)”, page 50 )
12) SDI Video Input (BNC)
SDI video input. Accepts 3G-SDI, HD-
SDI, or SD-SDI signal with up to 16 chan-
nels of embedded audio.
13) SDI Video Output (BNC)
SDI video output. Provides 3G-SDI, HD-
SDI, or SD-SDI signal with up to 16 chan-
nels of embedded audio.
14) HDMI Video Input (HDMI)
Accepts HDMI (1.4a) signal with 8
channels of embedded audio. The PIX
250i does not record or display content
encoded with HDCP.
15) HDMI Video Output (HDMI)
Provides HDMI (1.3) signal with 8
channels of embedded audio. Audio
configured with Setup Menu option
[Audio - HDMI/AES Output].
16) USB Connection
Connect to a Windows computer to load
firmware with PIX Loader software
(Available on the Sound Devices website).
( See “Setup Management and Firmware
Upgrades”, page 68 )