Sound Devices 722 - Manual (Page 11)

722 User Guide and Technical Information
9
LCD Display Descriptions
1
8
7
6
5
4 2 3
9
10
1) Battery Level Indicator
Shows the voltage level of the remov-
able rechargeable battery or external
power sources. External power over-
rides internal power when present.
Graphical bar for relative level and
numeric indicator for precise voltage
measurement.
2) File Name Display
Shows file name actively being recorded
or played back. In playback-stop mode,
flashing file name indicates that the fast-
forward and rewind keys can be used to
step through files in the current play-
back directory.
3) Absolute Time (A-time) Display
Shows the elapsed time of the file be-
ing recorded or played back. Flashes
in playback pause mode. In this mode
the FF/REW keys will scrub through
an open audio file. This display can be
set to reverse or flash during recording.
Flashes in playback-pause mode. The
A-time and the 24-Hour Time Counter
display can be exchanged if a large 24-
Hour Time Counter display is needed.
4) Time & Date Display
Alternating display between the set date
and time of the 722. This information is
written as the creation and modification
date for generated audio files.
5) Bit Depth Indicator
Shows the set record bit depth. In play-
back, shows the file bit depth.
6) Sample Rate Indicator
Shows the set record sample rate. In
playback, shows the file sample rate.
7) Headphone Source Display
Indicates the source for headphone out-
put. Sources and selection order are user
selectable in the setup menus.
8) External Drive Status
(space remaining/record ready)
Bar graph indicates amount of record
time remaining on the external FireWire
volume. Numbers show time in hours
and minutes based on the presently se-
lected number of record tracks, sample
frequency, bit rate, and file type. An as-
terisk next to any of the available drives
indicates that it is selected as a destina-
tion for recorded audio.
9) Internal Hard Drive Status
(space remaining/record ready)
Bar graph indicates amount of record
time remaining on the internal hard
drive. Numbers show time in hours and
minutes based on the presently selected
of number of record tracks, sample fre-
quency, bit rate, and file type.
10) CompactFlash Status
(space remaining/record ready)
Bar graph indicates amount of record
time remaining on the CompactFlash
media. Numbers show time in hours
and minutes based on the presently se-
lected number of record tracks, sample
frequency, bit rate, and file type.
For all three media types, an asterisk in front
of the media descriptor indicates that the
media is selected for recording. Highlighted
drive descriptor indicates drive selected for
record monitoring, playback or file directory
display.