Sound Devices 722 - Manual (Page 57)

722 User Guide and Technical Information
55
CL-1 Remote Control and Keyboard Interface
The CL-1 Remote Control and Keyboard Interface is an available hardware accessory to interface
with PS/2 compliant computer keyboards and enable external devices to control the 722. When us-
ing the CL-1, front panel controls and menu selections on the 722 can be mapped to keyboard short-
cuts, allowing for full keyboard control of the recorder. Additionally the CL-1 has contact closures for
programming remote inputs or outputs. These are commonly used for machine control and “remote
rolling” using a mixing console with transport controls.
Connecting the CL-1
1. Connect the included C. Link cable to the 722’s C. Link Input connector.
2. Connect the opposite end of the C. Link cable to the CL-1’s C. Link connector.
3. Connect a PS/2 keyboard to the PS/2 connector on the CL-1.
4. Connect switches between assigned pins 1-6, pin-7 (ground), and pin-8 (+5V) on the CL-1. ( See Logic
Inputs and Outputs )
The C. Link port on the 722 provides power for CL-1 operation.
Keyboard Assignments
Standard keyboard shortcuts have been pre-assigned and are listed below.
Menu Keys
Shortcut Key Function
Space Bar Enters Playback Mode
Pauses take in Playback Mode
Escape Cancel – Exits without saving in all menus
Enter Ok – Exits with saving in all menus (Check Mark or Edit)
Up Arrow Mirrors the LCD Up Arrow in all menus
Down Arrow Mirrors the LCD Down Arrow in all menus
Left Arrow Mirrors the LCD RWD Arrow in all menus
Custom Route User Interface – Un-assign Route
Time Menu – Moves to previous field
Right Arrow Mirrors the LCD FFWD Arrow in all menus
Custom Route User Interface – Assign Route.
InRoute User Interface – Edit if on ‘Custom Route’
File User Interface – Selects Options for Folders/Files when displayed
Shortcut Edit User Interface – Edit shortcut if on shortcut number
Scene/Track Lists – Edits (Same as hitting Play button)
Time Menu – Moves to next field.
CTRL + Up Arrow Setup User Interface Menu - Moves to the previous category
CTRL + Down Arrow Setup User Interface Menu - Moves to the next category
Page Up Setup User Interface Menu - Moves to the previous category or marker
Page Down Setup User Interface Menu - Moves to the next category or marker
Shortcut Edit User Interface Menu – Same as Enter
Menu Enters the Setup Menu
Home Setup User Interface Menu - Moves to the top of the list.
File User Interface – Moves to the top of the list
Shortcut Edit User Interface – Goes to first shortcut number or Hot Key
String User Interface – Goes to the beginning of the string