Quic ks tar t – Sound Devices 552 User Manual

Page 11

Advertising
background image

552 User Guide and Technical Information

7

Quic

ks

tar

t

Voice Prompt

The 552 features a Synthetic Voice for Enhanced Navigation, or SVEN. SVEN provides spoken word

feedback when Setup Menu features are adjusted. He is designed to simplify control and provide

important information to the user. Additionally, SVEN provides status information about the digital

audio recorder and time and date information. SVEN is routed only to the headphone outputs.

19)

Setting the Time and Date.

Press and hold the Battery Check button for the mixer to announce in headphones

the current time and date. If the setting spoken back in headphones is incorrect see

Time of Day/Date Clock section of the 552 User Guide.

20)

Insert an SD memory card into the back panel SD Slot.

Remove the protective rubber cover to access the SD memory card slot. Insert the

SD card into the slot until it sits securely in the slot. The card should glide smoothly

into the slot. Do not use excessive force when inserting the card and make certain

that the electrical contacts are facing downwards. Push on the card to remove it.

21)

Controlling the Integrated Digital Recorder.

The Recorder Controller is used to initiate the Record, Stop, Playback, Rewind, Fast

Forward functions as well as to navigate through recorded files.

Press in to Pause/Stop

Push left to load the previous file.
Push left to Rewind during playback.

Push right to load the next file.
Push right to Fast Forward during playback.

Push down to playback the last recorded file or loaded file.

Push up to begin recording.

22)

Making Changes in the Setup Menu.

The 552 has many features that are accessed through its Setup Menu. For details on

entering and controlling the Setup Menu see Accessing the Setup Menu section in

the 552 User Guide.

23)

Power Down the Mixer.

Slide the power switch to the center position to power down. All settings are saved

to EEPROM and will be saved and recalled upon next power on whether or not the

unit is powered or has batteries.

Advertising