Setup (continued) – TDK TVT1001 User Manual
Page 11
11
SETUP (CONTINUED)
A. TO USE WITH A COMPUTER (TVT2002 only):
Install recording software as shown on page 22.
With the unit NOT connected to AC, connect the
small end of the USB Cable (included) to the USB
Out jack on the rear of this unit and the other end
to a USB jack on your computer.
NOTES:
•
When connecting the unit, refer to the owner’s
manual of the computer, as well as this manual.
•
Make sure the power is off and both units are
unplugged before making any connections.
•
When connected via the USB cable, the USB
indicator will light in the display.
6a. Insert the small end of the AC adapter into the Power jack
(located on the rear of the unit). Connect the other end
to a wall outlet having 120V AC, 60 Hz.
NOTES:
•
Remove both the DC plug and the AC IN plug to
disconnect the AC adapter when not in use.
•
Only use the supplied AC adapter which has the
following specs: DC 12V.
CONTINUE TO PAGE 15 TO USE THE TURNTABLE WITH A COMPUTER
TO AC
JACK
Computer
Turntable
USB cable
USB jack