TeachLogic Airlink Router - Manual (Page 10)

transmitter
antenna installation TRANSMITTER setup instructions
Locate transmitter (ALS-960) in vicinity of mixer
or other audio source.
Plug power supply into AC power outlet
Connect output from primary audio source to
transmitter to either:
Balanced Input: Shielded cable with XLR
Unbalanced Input: Shielded cable with RCA
connector (Mono or Stereo)
Connect alternate audio source to other input •
•
•
•
•
•
Screw antenna into TNC
connector loosely.
Adjust antenna to straight
up vertical position.
Tighten connector to
snug fit.
104
Do not attempt to change
antenna orientation while
in tightened condition.
To extend the range of the
AirLink AR-960 system,
replace the antenna of the
transmitter with a periodic-
log antenna oriented in the
horizontal position.
OFF
AUX
MIC IN
CONDENSER-—UNBAL .DC OUT
10~15V
5V
OFF/ON
BALANCED
OUT IN
L
R
L
R
DC IN
10~15V
ANTENNA
MIXER
DIGITAL MUSIC PLAYER
POWER SUPPLY
RECORDER
MICROPHONE
caution
note
.DC OUT
10~15V
AirLink
owner’s manual
4
Transmitter