TeachLogic Airlink Router - Manual (Page 11)

5
RECEIVER setup instructions
Locate receiver at remote location
Plug power supply into AC power outlet
Connect audio output from receiver to input of
auxiliary sound system
POWER SUPPLY
OR
AMPLIFIER
SPEAKER
LOW/HI
AF OUT
DC IN
10~15V
ANT. A ANT. B
•
•
•
antenna installation
Screw antenna into TNC
connector loosely.
Adjust antennas to 45°
outward position.
Tighten connector to
snug fit.
Do not attempt to change
antenna orientation while
in tightened condition.
caution
note
Receiver