Trail Master Suspension TM407N FORD F-150 4WD 6 SUSPENSION LIFT KIT User Manual
Page 19
19
TM407N
Revised
6.14.13
c. Carefully bend brake line out of the way
and install kit brake line bracket. Secure
using vent line fitting removed.
d. Secure brake line block previously un-
bolted and moved out of the way to the re-
maining hole in the kit brake line bracket
using 3/8” bolt & hardware provided.
7. Install kit parking brake cable bracket on
rear driver side of vehicle.
a. Disconnect parking brake cable for driver
side rear wheel at junction located just in
front of driver side front leaf spring mount.
b. Push Parking Brake Cable previously dis-
connected out of bracket bolted to leaf spring
perch.
c. 2004-2005 models: Remove Nut from
front leaf spring pivot bolt next to brake line
previously disconnected and remove OE
bracket.
d. 2006 models: Remove nut from front leaf
spring pivot bolt next to brake line previously
disconnected.
Brake
Line
Block
Kit Brake
Line
Bracket
82-TM24012
Vent
Line
Fitting
OE Brake
Line
Block
Kit 3/8”
bolt &
hardware
Leaf
spring
Pivot Bolt
Driver Side Parking Brake
Cable Disconnected
Parking Brake
Bracket
Parking Brake Line
Removed from bracket