Trebor 110R - Manual (Page 16)

PAGE 16 MODEL 110R PUMP OPERATION / MAINTENANCE MANUAL
4.8 ASSEMBLY
4.8.a Head Assemblies
Pilot Valve (Both Heads)

Install the pilot valves with 2 wraps of TFE thread tape in each head.
Figure 4-1
Shuttle Assembly (Master Head)
NOTE: Ensure that the shuttle spool moves freely inside the shuttle sleeve prior
to installation. Never lubricate spool or sleeve.

Check the shuttle assembly making sure it has notched O-rings on each end.
(See Section 4.4 for shuttle detail.)

Insert shuttle sleeve into the shuttle bore.

Insert shuttle spool.

Insert detent.

Install shuttle cap with 2 wraps of TFE tape.