Cobra Digital BT 200 - Manual (Page 11)

Introduction
17 Nothing Comes Close to a Cobra ® English
Introduction
16
Operating Your Handset
Customizing the BT 200
NOTE
If corrections are needed before saving the entry, press the Left or Right
Arrow Function button to move the cursor to the character that is to be
changed and press the Delete Function button to remove that character.
Then scroll the list to select the correct character.
NOTE
A “double click” on the Delete Function button will remove the entire entry
and return the cursor to the initial position after Name.
To Edit an Existing Name or Phone Number:
1. Select Phonebook from the Menu function, scroll down to
name or number to be edited and press the Edit Function
button to arrive at the screen shown.
2. Use the Right and Left Arrow Function buttons to move
the cursor to the character(s) to be changed and proceed
as described for making corrections when entering a new
name or number.
3. Press the Save Function button to save the changes or
deletion and go back to the Phonebook function.
PA Output
If, during installation, you have connected the Cobra Bluetooth handset connection
cable to your vessel’s stereo AUX input, you can allow the handset
to be used as a public address microphone.
To Enable Use of Auxiliary Speakers:
1. Select PA Output from the Menu function to arrive at
the screen shown.
2. Press the On or Off Function button to toggle between
On and Off condition.
NOTE
An optional installation cable is necessary to use the PA feature.
Phonebook Entries
The Operation section described using a Phonebook entry to dial an outgoing call.
Both names and numbers can be stored in the Phonebook.
To Enter a New Name and Phone Number
1. Select Phonebook from the Menu function and scroll
the pointer down to Add New at the bottom of the list
to arrive at the screen shown.
2. Press the Enter or New Function button to advance
to the Phonebook Edit mode.
3. Press the Up or Down Arrow button to scroll the
alphanumeric list to the first character of the Name.
NOTE
The list consists of the letters A to Z followed by the
numbers 0 to 9 followed by +, “space,” *, and # and
it will wrap around from # to A.
NOTE
If only a number (without a name) is to be entered,
at step 3, press the Right Arrow Function button until
the cursor moves to the first character of the number
and jump to step 7.
4. When the first character appears above the cursor, press
the Enter or PTT button to save the character and move
the blinking cursor to the right.
5. Repeat step 4 until the entire name has been entered.
6. Continually press or press and hold the Right Arrow
Function button until the cursor moves to the first
character of the Number.
7. Enter the phone number in the same fashion as the name.
8. Press the Save Function button to save the entry and go
back to the Phonebook function.
Operating Your Handset
Customizing the BT 200
NAME :
NMB:
SAVE DEL
Enter a New Name
and Phone Number
+1 555 588 2300
JANE DOE
ADD NEW
EXIT
EDIT
49
50
NEW
Add New
ON OFF
PA OFF
Enable Use of
Auxiliary Speakers
NAME : BILL ANDERSON
NUMBER: +1 555 566 1234
SAVE DEL
Phonebook Edit
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 16