Cobra Digital BT 200 - Manual (Page 13)

Introduction
21 Nothing Comes Close to a Cobra ® English
Introduction
20
Operating Your Handset
Customizing the BT 200
To Set Auto Dim On or Off:
1. Select Auto Dim from the Display mode to advance to
the screen shown.
2. Press the Off or On Function button to select the
desired condition.
3. Press the Enter button to save the setting and return
to Display mode.
NOTE
When Auto Dim is set to On, the LCD screen backlight
will be turned Off after 15 seconds if no button is
pressed. It will be turned On for 15 seconds following
any button press except PTT.
Operating Your Handset
Customizing the BT 200
Ring Tones
Ten different ring tones are available from which to choose.
To Select a Ring Tone:
1. Select Ring Tones from Settings mode to advance
to the screen shown.
2. Press the Up Arrow or Down Arrow button to scroll
through the tones from 01 to 10.
3. Press the Play Function button to hear the selected tone.
4. Press the Enter or Save Function button to save the
tone and return to Settings mode.
Key Tones
Key tones confirm button presses for all but the PTT button.
To Set Key Tones On or Off:
1. Select Key Tones from Settings mode to advance
to the screen shown.
2. Press the Off or On Function button to select the
desired condition.
3. Press the Enter or PTT button to save the setting
and return to Settings mode.
Bluetooth Region
Different parts of the world use different sets of radio frequencies for Bluetooth
pairing. You can select from four regions for handset operation: (1) USA - Europe,
(2) France, (3) Spain and (4) Japan. Most users will not need to change these
settings.
To Select A Bluetooth Region:
1. Select BT Region from the Settings function to arrive
at the screen shown.
2. Press the Up or Down Arrow buttons or the Up or Down
Function buttons to scroll through the list.
3. Once the pointer at the left of the screen is positioned
at the region you want, press the Enter, PTT or Save
Function button to save the setting.
AUTO DIM
ON OFF
OFF
Adjust Auto Dim
VOX
ON OFF
OFF
VOX Setting
VOX
The VOX function can be turned On or Off directly with the Mode button as
described on page 7 or from the Menu.
To Set VOX On or Off from the Menu:
1. Select VOX from Settings mode to advance to the
screen shown.
2. Press the Off or On Function button to select the desired
condition.
3. Press the Enter button to save the setting and return
to Settings mode.
NOTE
The VOX On or Off setting will be retained when the
unit is turned Off.
RING TONE SELECT
R 01
PLAY SAVE
Select a Ring Tone
KEY TONES
ON OFF
ON
Set Key Tones
USE - EUROPE
FRANCE
SPAIN
SAVE
*
BT REGION SET
Setting BT Region
BT200_MANL.qxp:10732 Cobra MR F300 BT 12/8/08 1:44 PM Page 20