Unitec POS4000/V2 User Manual
Unitec
Advertising
Table of contents
Document Outline
- 1 QUICK START UP OF A NEW SYSTEM
- 2 QUICK REFERENCE
- 3 OVERVIEW
- 4 CASHIER OPERATIONS
- 5 CUSTOMER ACCESS
- 6 Management Control (Command Reference)
- 6.1 Fleet Account Management
- 6.2 System Configuration
- 6.2.1 Set System Time and Date
- 6.2.2 Configuring a Group
- 6.2.3 Set Code Age Warning
- 6.2.4 Set Code Length
- 6.2.5 Disable Cashier Keys
- 6.2.6 Set Serial Baud Rate
- 6.2.7 Set Languages
- 6.2.8 Set Program Relays
- 6.2.9 Cash Upgrades MENU ->
- 6.2.10 External POS MENU->
- 6.2.11 Multiple Unit MENU->
- 6.2.12 Modem rings
- 6.2.13 E-System setup MENU->
- 6.2.14 Relay Latching
- 6.2.15 Relay Stacking
- 6.3 Print Accounting Report
- 6.4 Set Prices
- 6.5 Service Routines
- 6.6 Clear Audit Counts
- 6.7 Set Messages
- 6.8 Set Passwords
- 6.9 Void a Code
- 6.10 Memory Information
- 6.11 Code Sales Lockout
- 6.12 Check Code Status
- 6.13 Setup a Feature
- 7 Backup Operations (not for use with Autotec)
- 8 Installation and Wiring
- 9 Test and Troubleshooting
- 9.1 Console Testing
- 9.2 Interface Board Testing
- 9.3 Printer Doesn't Print
- 9.4 System Locked Up
- 9.5 Customer Buzzer Failure
- 9.6 Code Stacking Does Not Work
- 9.7 "Enter Wash" Signal Does Not Work
- 9.8 "Reenter Code" Signal Does Not Work
- 9.9 Bill, Coin or Audit Inputs Do Not Work
- 9.10 Main Console Keys Do Not Work
- 9.11 System Resets Each Time Power Is Turned On
- 9.12 Main Console Is "DEAD"
- 10 Printer Instructions