Unitec POS4000/V2 - Manual (Page 47)

POS4000
Document Number: POS4003 39
Document Title: POS4000/V2 Operations Manual
6.2.5 Disable Cashier Keys
This command allows you to disable specific cashier keys. If a key is disabled, it
cannot be sold as part of a customer transaction. All cashier keys for features
that are not available on the particular carwash installation should be disabled.
This prevents a cashier from selling features that are not available and is critical
if you have the automatic buy up feature that allows customers to upgrade or pay
cash for a wash at the carwash entrance.
To select this command, scroll through the system configuration secondary menu
until "Disable Cashier Key" is display and press the [ENTER] key. Once selected
you will be prompted Press Cashier Keys to Disable, Then ENTER. Press all
cashier keys that should be disabled and then press the [ENTER] key. To
enable all cashier keys, press only the [ENTER] key.
For example, if you have a console with 4 programs, 4 options and 4 groups and
you don't use group 4 and the carwash doesn't have program 4 or options 3 and
4, you disable the unused keys as follows:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[ENTER]
[MENU UP/DOWN] until "Disable Cashier Key" is displayed
[ENTER]
[Prog 4]
(disable program 4)
[Opt 3] (disable option 3)
[Opt 4] (disable option 4)
[Group 4] (disable group 4)
Setting the code length to 5 digits will result in reducing the
number of valid codes stored in memory from 5000 to 3000. This is
necessary since there is a limited number of 5 digit codes. If there
are already more than 3000 codes in memory, you must delete
enough old codes to reduce the number in memory to fewer than
3000 (see section 6.10.5) or delete all valid codes.
Important: