Valco Baby Twin Tri Mode - Manual (Page 7)

The unique TRI-MODE™ swivel system is as
flexible as it is functional over a variety of
terrains and uses.
1. LOCK: This position is best for use on
extremely rough or soft terrain such as sand
etc which inhibit wheel swivel. To lock your
wheel, rotate the dial to the “LOCK” position.
Swivel the wheel around till it locks into
position.
2. O : The central position locks the wheel into a
tight 45° swivel arc. This provides more
stability for use with a toddlerseat or when
going down inclines so as not to turn so
sharply!
3. SWIVEL: This position allows full, unfettered
360° swivel action.
Installing/Removing your hoods
Identify left right side hoods, where
each hood centre housing (A) is in
the middle of the pram. Place the rear hood skirt OVER the
stabiliser bar (C).
1. Insert hood section housing (A)
into the corresponding housing in
the centre of the seat (B).
2. Place the other plastic hood housing
above the corresponding housing on the
side of the stroller. Be sure that the
locking strap is out of the way and ABOVE
the hood housing.
3. Align the raised track on the stroller
housing with the corresponding channel in
the hood housing.