Valco Baby Twin Tri Mode User Manual
Page 8
4. Slide the hood housing downward,
engaging the track in the channel,
continue sliding downward until
the rivet outside (D) is fully
engaged in the housing.
5. Repeat the procedure for the
other hood.
6. Secure each hood to the rear of
the frame with Velcro straps at
the centre (E), and both sides of
the hood (F).
NOTE:
Before using your stroller, be
sure to attach the tether straps
around the stroller frame by feeding
the strap through the slit in the
steel buckle. While not essential for
safety, these additionally secure the
seat to the stroller frame.
The new “no zip” recline offers an
almost infinite amount of seat
adjustments:
1. RECLINE: While squeezing the
centre release mechanism in a
pincer action, ease the seat down
to the desired position.
2. INCLINE: Place your hand in the
centre of the rear of the seat.
3. Pull the incline strap while gently
pushing on the rear of the seat
until the desired position has
been reached.
IMPORTANT WARNING:
Always test that the seat is securely locked in place.