Wi Digital Systems Wi-AudioLink User Guide - Manual (Page 13)

r
Mode : The Mode multifunction button allows the user to choose between three different
power up modes to support Passive Guitars, Active Guitars or Stereo Line in
connection to the transmitter. To select the desired operations mode, press
and hold the Mode button for 2 seconds until the blue LED change its flashing
sequence, then release. To cycle between the three modes, simply press and hold
the Mode button and the transmitter will cycle between the three modes along with
the Blue LED flashing sequences for each of the modes. Release the mode button
once the desired mode setting is reached.
F Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions .
s
Charging Port: The transmitter uses a mini USB connection to power up and charge the internal
batteries. The transmitter can be charged using the supplied universal AC charger,
via an instrument’s built-in USB port or the optional AA battery power booster USB
adapter.
Belt Clip: The transmitter can be attached to the optional Wi FreeBody guitar strap, standard
guitar straps, belts, shirts and pants pockets. The rigid, small sized, light weight
design is easy to wear without impeding your body movement.
TRANSMITTER FEATURES
Wi AudioLink
13
11