Transmitter connection, Connecting musical instruments & dj gear – Wi Digital Systems Wi-AudioLink User Guide User Manual
Page 22
Connecting Musical Instruments & DJ Gear!
The Wi AudioLink transmitter supports digital and analog instrument
connection such as Digital Pianos, Keyboards, Electronic Drums, Electronic
Wind Instruments, Digital Multitrack Recorders, Samplers, Effects Pedals,
Mixers, DJ gear, and more...
1.
For a (Mono) connection locate the 1/4” mono to 1/8” stereo cable.
For a (Stereo) connection locate the 1/4” stereo Y-split to 1/8” stereo cable.
2.
Connect the 1/8” stereo end of the cable into the “Audio Input” jack
on the transmitter.
3.
Route the audio cable beneath the belt clip as shown to prevent accidental
disconnection of the cable.
4.
For (Mono) connection, connect the 1/4” mono male end of the cable to the
left mono output (L/MONO) located on the back panel of the musical instrument.
TRANSMITTER CONNECTION
Wi AudioLink
22
Belt Clip
Audio Cable
Audio Input Jack
1/4” Mono to 1/8’ Stereo Cable