Wi Digital Systems Wi-AudioLink User Guide - Manual (Page 21)

5.1 Passive Guitar Connection
Power up the transmitter by pressing and holding the POWER button for 2 seconds.
F The slow flashing blue LED indicates active guitar connection mode and the flashing Green LED
indicates the transmitter is searching for the receiver. The flashing Green LED on the transmitter
will turn to solid green once the receiver is powered up, paired and linked with the transmitter.
F The standard factory power up setting is set for Passive Guitars . The transmitter can remember
and power up in the last power up mode selected .To change the startup mode to the desired
operation mode please refer to the “Tx Function Matrix” of this manual for detailed instructions.
5.2 Active Guitar & Electric Acoustic Instrument Connection
a. Power up the transmitter by pressing and holding the POWER button for 2 seconds.
b. Press and hold the Mode button for 2 seconds. The Blue LED will display fast flashes.
F The fast flashing Blue LED indicates active guitar / mono line-in connection mode and the flashing Green LED
indicates the transmitter is searching for the receiver . The flashing Green LED on the transmitter
will turn to solid green once the receiver is powered up, paired and inked with the transmitter.
6. Attach the Wi AudioLink to the optional Wi FreeBody Guitar Strap or to your belt.
F Please proceed to page 26 for receiver connection instructions.
TRANSMITTER CONNECTION
Wi AudioLink
21
r
k
(Tx)
k
r
k