Winchester Repeating Arms X Pump (SXP) User Manual

Page 24

Advertising
background image

22

These notches are a code to allow you to determine the

choke designation while the tube is installed. Rim

notches refer specifically to lead shot. Use the charts on

page 21 to cross-reference from lead to steel, and

determine the appropriate tubes for your ammunition and

hunting/shooting situation.
Several choke tubes are supplied with your shotgun.

The choke tubes listed are also available as accessories.

Remember, WinChoke, Standard Invector and

Invector-Plus tubes are not interchangeable. Invector-Plus

tubes are for Winchester shotguns with back-bored

barrels only. Before removing or installing tubes, or

reading the rim notch code, make sure your shotgun is

completely unloaded.

c

hoke

t

ube

r

emovAl

1. Place the “safety” in the on safe position. Always

open the action and make sure the shotgun is

completely unloaded. Always keep the muzzle

pointed in a safe direction.

2. Use the choke tube wrench to loosen the tube,

turning it counterclockwise. Finger-twist the tube

the rest of the way out of the barrel.

c

hoke

t

ube

i

nstAllAtion

1. Place the “safety” in the on safe position. Always

open the action and make sure the shotgun is

completely unloaded. Always keep the muzzle pointed

in a safe direction.

2. Before installing a tube, check the internal choke tube

threads in the muzzle, as well as the threads on the

choke tube to be sure they are clean. Lightly oil the

threads with a high-quality, lightweight gun oil.

3. Using your fingers, screw the appropriate tube into the

muzzle of the barrel, tapered end first, notched end

outward. When it becomes finger-tight, use the choke

tube wrench to firmly seat the tube.

NOTICE! the ChoKe tube should be PeriodiCally
CheCKed to assure that it is tight and FirMly
seated. beFore CheCKing, Follow all ChoKe tube
reMoval and installation saFety guidelines
Previously outlined.

s

cope

m

ountinG

i

nstructions

beFore Mounting a sCoPe, sight or other
aCCessories to your shotgun, PlaCe the
“saFety” in the on saFe Position. oPen the aCtion
and MaKe Certain your shotgun is CoMPletely
unloaded. KeeP the MuZZle Pointed in a saFe
direCtion. Failure to Follow these warnings
Could result in serious injury or death.

Some Super X Pump shotguns are designed to accept a

scope or other optical sight; usually these are turkey and

deer models. The receiver tops of some of these models

are drilled and tapped for scope bases, while some models

Advertising