OSRAM SYLVANIA BoxLED Plus BX06BA-WF4 - Manual (Page 3)

3
2.5 Clean the mounting traks to ensure optimum adhesion of the LED modules.
2.6 Remove the protective film from the tape on the back of the LED modules (see
Figure 8).
2.7 Snap the LED modules into the vertically mounted tracks (see Figure 9).
2.8 Tie wrap any excess wire length to inside of track to prevent shadowing (see
Figure 10).
Figure 8 Figure 9 Figure 10
3.0 ELECTRICAL INSTRUCTIONS
3.1 Use wire nuts or connectors to connect the white and red (+) input wire of the modules to
the red (+) output wires of the 24V power supply. Connect the black and white (-) input
wire of the modules to the blue (-) output wire of the 24V power supply (see Figure 11).
3.2 Cap off any unused connection wires when finished.
3.3 Make sure AC line is OFF before beginning power supply installation. Secure power
supply to clean metal surface using screws (see Figure 12).
Figure 11 Figure 12