SCANTECH ID (Champtek company) Pollux P-4010 - Manual (Page 16)

Installation 10
Exterior View
Cable cap
Open to change the
interface cable.
Window
LED/ Speaker cap
Cover locks
Secure the window cover.
NOTE
This scanner beeps whenever data has been read correctly. Both
frequency and volume can be adjusted (see section 2.1.1 Speaker
frequency and 2.1.2 Speaker volume on the Configuration Guide).
2.2 CONNECTING
Interface Selection
This scanner allows you to connect your host system using four different
interface cables: RS232, Keyboard Wedge, USB, and Powered USB. On
powering up, the scanner senses the type of the interface used and switches to
the appropriate protocol.
Interface Cable Connector type
RS232 (Product Number: 0114-SM01121) Sub-D 9-pin
Keyboard Wedge (Product Number: 0114-SM02121) Standard PS2
USB (Product Number: 0114-SM04121) USB connector