Crimestopper Security Products CS-2012DP-TW1 - Manual (Page 26)

26
REMOTE PROGRAMMING DIAGRAM
1. Turn key to the ON position.( doors will lock if autolock is programmed )
2. Press Programming button 4 times, then after a few seconds the unit will flash the parking lights 4 times.
3. For CS2011DP systems: Press button #1 (Lock) of the transmitter; for 2-Way paging systems and “Sidekick” remotes:
Press Buttons #1 & 2 together. You should get 2 light flashes indication the unit is waiting for a 2
nd
code, then press the
same combination of buttons on a second remote, the unit will flash 3 times indicating its waiting for the 3 rd code and lights
will flash 4 times for 4 th code. If all 4 codes are learned, the unit will automatically exit code-learning mode, otherwise turn
key off and close hood.
NOTE: When learning 2-Way LCD or 2-Way LED remotes, wait for the confirmation beep or LCD “Antenna Icon” message
before learning the next remote.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
2-WAY SYSTEMS &
ONE WAY CS-2011DP
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
PRESS
LOCK ONLY
"SideKick" REMOTES
COMPLETE