Vehicle operation, Vehicle #2 control – Crimestopper Security Products CS-2012DP-TW1 User Manual

Page 27

Advertising
background image

27

2-VEHICLE OPERATION

The CS-2011DP, CS-2012DP-TW1, CS-2014DP-TW2-FM and CS-2900DP-FM systems can be used for 2 car
operation. A single remote can control two independent vehicles with identical systems installed, for example, two
2011’s or two 2900’s.

NOTE: These systems ARE NOT interchangeable. A CS-2011DP system remote CANNOT control a CS-
2012DP-TW1, CS-2014DP-TW2-FM or CS-2900DP-FM system and vice versa!

See diagram below on how to switch your remote(s) to vehicle #2 operation. To set up the 2-Vehicle operation you
must first program your remotes to Vehicle #2. Follow the “Transmitter Programming” steps at the second vehicle
and learn YOUR remote, along with vehicle #2’s existing remotes.

VEHICLE #2 CONTROL:

CS-2012DP-TW1

Press & hold side button

for 5 seconds, Remote will

beep twice then you have

15 seconds to control

vehicle #2.

CS-2014DP-TW1

Press & hold side button

for 2 seconds to change

vehicles. A numeral 1 or 2

will appear in upper right

corner of LCD screen.

CrimeStopper

CS-2011DP &

Press & hold 2 seconds to

control vehicle #2.

"Sidekick"

INFINITY

TM

Press & hold 2 seconds to

control vehicle #2.





Press 3 times to control
vehicle #2. See owner’s
manual for operation.

Advertising
This manual is related to the following products: