ConnectPRO SL-18 - Manual (Page 5)

StreamLine Console
l Packing List
These are required to install the StreamLine Console:
n StreamLine Console: assembled "LCD panel +
keyboard + mouse pad" drawer
n Rear bracket & extension kit: This kit contains two pieces of rear brackets and two pieces of aluminum
blocks. Make sure you have the correct kit to fit the depth of your cabinet. Note: the following length is
measured between "front pole and rear pole inside a rack cabinet" not the outside depth of a rack cabinet
enclosure.
RES-1 RES-2 RES-3 RES-4
Front Pole to rear pole distance
cm inch cm inch cm inch cm inch
Minimum 49.5 19
1
/
2
57.5 22
5
/
8
67.5 26
5
/
8
77.5 30
1
/
2
Maximum 57 22
3
/
8
70.5 27
3
/
4
80.5 31
5
/
8
90.5 35
5
/
8
n KVM Switch: KVM module box can be connected to a StreamLine Console or be used as a stand-alone
KVM switch.
Module type SK-01 SK-18 SK-28 SK-216
No. of console port 1 1 2 2
No. of computer port 1 8 8 16
KVM switch inside No Yes Yes Yes
n Bolt-and-nut set
n User's manual