ConnectPRO SL-18 - Manual (Page 7)

StreamLine Console
5. Remove the rear brackets. Now, the front brackets hold the assembled drawer.
6. Attach the aluminum extensions (from the Rear bracket & extension kit) to both sides of the KVM
module box. Please note the length of the aluminum extensions and mount them in one of the following
ways.
Short aluminum extensions attachment Long aluminum extensions attachment
7. Slide the rear brackets onto the aluminum extensions. And, then insert both slide rails of the assembled
drawer into the tight space formed by the combination of the rear brackets and the aluminum extensions.
The KVM module should be pushed in evenly on both right and left sides.