ConnectPRO SL-18 - Manual (Page 6)

StreamLine Console
l Assembly
1. Choose a proper position for the rack drawer. Mount
the rear brackets (from the Rear bracket & extension
kit), and lightly fasten them onto the rear vertical poles.
Both will be removed later.
2. Remove the stopper from the assembled drawer. The stopper is designed to refrain the drawer from
sliding out during transportation.
3. Slide the assembled drawer to the rack cabinet from
the front and insert the two slide rails of the
assembled drawer into the pockets of the rear
brackets.
4. Fasten the assembled drawer onto the front brackets
by four screws.