Casio WK210ES1A - Manual (Page 51)

English
Saving Keyboard Setups to Registration Memory
E-49
1.
Press bq .
2.
Press cs and ct at the same time to enable
registration.
• Pressing cs and ct at the same time again will disable
registration.
3.
Configure the tone, rhythm, and other settings
you can to include in the setup.
4.
Press bt to select the bank you want.
Each press of bt cycles through the bank numbers.
• You also can select a bank by holding down bt as you
use the bs (10-key) number buttons to enter a bank
number.
5.
While holding down co , press a button from ck
to cn to select an area.
This will save the settings you configured in step 3 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
1.
Press bt to select the bank that contains the
setup you want to recall.
2.
Use buttons ck to cn to select the area whose
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
• Notes currently being sounded by the keyboard may stop if
you recall a setup that causes a change in octave shift
(page E-18). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
■ Saving registration Data on an External Device
See page E-62 for details about how to transfer registration
data to a computer for storage.
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in registration memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
whenever you disconnect the AC adaptor.
• Connect the AC adaptor to the keyboard and plug it into a
power outlet before replacing batteries.
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
1 to turn off power.
To save a setup to registration
memory
Lit when on
Bank number
Bank 4
S t o r e
Stored in Setup 4-1
To recall a setup from registration
memory
Bank 6
R e c a l l
Setup 6-1 recalled