Casio QV-R61 - Manual (Page 143)

OTHER SETTINGS
143
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1. In the REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “USB”, and
then press [
̈].
3. Use [ ̆] and [̄] to select the setting you
want, and then press [SET].
Select this setting:
Mass Storage (USB
DIRECT-PRINT)
PTP (PictBridge)*
When connecting to this type of
device:
Computer or USB DIRECT-
PRINT-compatible printer (page
156)
PictBridge-compatible printer
(page 156)
* “PTP” stands for “Picture Transfer Protocol”.
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external storage
device. Use this setting for normal transfer of images
from the camera to a computer (using the bundled
Photo Loader application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.