Casio QV-R61 - Manual (Page 50)

GETTING READY
50
IMPORTANT!
• Recording images without configuring the clock
settings causes incorrect time information to be
stored with image data. Be sure to configure the
clock settings before using the camera.
• A built-in backup battery retains the date and time
settings for about two days if the camera is not
supplied with power. The date and time settings will
be cleared when the backup battery goes dead. The
following are the conditions when power is not being
supplied to the camera.
— When the rechargeable batteries are dead or
removed from the camera
— Disconnecting the AC adaptor while it is being
used to power the camera (without batteries
loaded)
• The date and time setting screen will appear on the
monitor screen the next time you turn on the camera
after the date and time settings have been cleared.
If this happens, reconfigure the date and time
settings.
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 142) or clock (page 137) settings.
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the
camera to record images.
• Display language
• Home city
• Date style
• Date and time
Note that the current date and time settings are used by
the camera to generate the date and time that are stored
along with image data, etc.