Casio QV-R61 - Manual (Page 62)

62
BASIC IMAGE RECORDING
Digital Zoom
Digital zoom is activated after you reach the maximum
optical zoom factor (3X). It enlarges the part of the image
at the center of the image screen. The range of the digital
zoom factor is shown below.
Digital Zoom Factor Range: 3X to 12X
(in combination with optical
zoom)
1. In the REC mode, press [MENU].
2. Use [
̇] and [̈] to select the “REC” tab.
3. Use [
̆] and [̄] to select “Digital Zoom”, and
then press [
̈].
4. Use [ ̆] and [̄] to select “On”, and then
press [SET].
• Selecting “Off” disables digital zoom.
5. Slide the zoom
controller towards
(Telephoto)/
to
change the zoom
factor.
• When zoom reaches
maximum optical zoom,
it stops momentarily.
Keep the zoom
controller pressed to the
(Telephoto)/ side
and zoom will switch
over to digital zoom.
• Switching to digital zoom causes the zoom indicator
to appear on the monitor screen. The zoom indicator
shows the current approximate zoom factor.
6. Record the image.
Zoom indicator
Digital zoom indicator
1X 3X 12X
Current zoom factor
Optical Zoom
Digital
Zoom