ClearOne Titan Media Cart - Manual (Page 10)

8 Technical Support: 800.283.5936
5. Attach the Rail Track to the Horizontal Support using two 8-32 Pan
Head Screws.
6. Slide the Camera Bracket down over rail.
» NOTE: Attaching the Camera Bracket is optional. The bracket is
normally used with codecs that have a detachable camera or with
a small PTZ camera. This bracket allows the camera to be placed
at eye-level between the monitors.
» NOTE: To adjust the Camera Shelf height, pull the Adjusting Pin out
of the Rail Track, slide the Camera Bracket to the desired height,
and replace the Adjusting Pin.
7. Securely anchor the Wall Plates (not supplied) to the Horizontal
Support using eight 5/16 Bolts, eight 5/16 Washers and eight 5/16
Nuts.
» NOTE: Adjust the position of the Wall Plates based on the size of
the screens.
Horizontal Support
Rail Track
Pan Head Screws
Camera Shelf
Washers and Nuts
Wall Plate
Bolts
Washers and Nuts
Bolts
Horizontal
Support