ClearOne Titan Media Cart - Manual (Page 12)

10 Technical Support: 800.283.5936
2. Lower the screen into place with the Vertical Rails hooking over the
Wall Plate.
3. Thread the Locking Bar from the side through the Wall Plate and both
Vertical Rails. When fully inserted, turn in place to position locking tab..
» NOTE: For instructions on installing the Codec Shelf, please see
page 11.
A
ttAching A
ptZ c
AmerA
1. Secure the camera to Camera Bracket using the 1/4-20 Screw.
» NOTE: Different camera models can be attached to the Camera
Bracket using individual mounting hardware supplied by the
camera manufacturer.
Camera
Camera
Bracket