ClearOne Titan Media Cart - Manual (Page 7)

Assembly 5
3. Remove and set aside the Locking Bar from the OmniMount 1N1-L Flat
Panel Mount assembly (not supplied), then securely anchor the mount
to the Vertical Support using four 5/16 Bolts, four 5/16 Washers and
four 5/16 Nuts.
» NOTE: The Flat Panel Mount can be attached higher or lower on
the Vertical Support depending on desired position and size of
screen.
Screen
Vertical
Rail
4. Using hardware supplied with the 1N1-L mount, attach the vertical rails to
the back of the screen. (See 1N1-L instructions for more information.)
Washers and Nuts
Bolts
Locking Bar
and Screws
Wall Plate