Led function, Button – Monarch Instrument Track-It User Manual
Page 21
Track-It User Guide
Page 21
Rev 1.02 06/21/11
3.9.5.2. LED Function
Some devices have a programmable LED which can be programmed by the user.
Note
– turning the LED on can have a significant impact on battery life. Choices for LED indication are (in this
instance)
Off -
LED is off and will not operate on the device
Blink when armed -
LED will blink while the device is armed to record but is not actually recording.
Blink when recording -
LED will blink when the device is actually recording.
Blink on alarm -
LED will blink if there has been an alarm condition.
Note
– all LED blink options can be selected together.
LED Blink Rate
Selects the time interval between blinks in seconds
– the shorter the time interval the
higher the battery load.
3.9.6. Button
The Button tab may or may not be present depending on the device attached. If the
device has a button it may be programmed here.
Check the boxes for the functions you wish the button to perform. Note that there may
be other default button functions that are not listed here. The functions listed are device
dependant.