Monarch Instrument Android Application - Manual (Page 7)

RFID Logger Android App User Guide Page 7
The content of this window depends on the type of logger being used.
The Y-Axis for each channel can be manually customized by selecting the
maximum and minimum values from the drop down menus. The graph
will be scaled accordingly.
By checking the Y-Axis Auto Scale radio button, the graph will always
scale the Y-Axis so that the trends fill the 80% graph from top to bottom
as shown below. Note that if the X-Axis is zoomed, as you scroll through
the data the Y-Axis will change to suit the section of graph being
displayed. If you want to zoom the Y-Axis and have it remain constant
you need to manually zoom it.
There is an X-Axis Scale dropdown menu which allows the user to set the X-Axis zoom. This has the same
function as the X-Axis zoom buttons described
above .
Press the OK () button to accept or “X” to cancel.
SAME TRENDS AS ABOVE WITH AUTO SCALED Y-AXIS
The graph image can be saved to memory at any time by using the standard Android screen capture
button combination on your device. (On Android 4.0+ press and hold the Volume Down and Power
buttons at the same time until you see the screen shot has been taken)
Return to the
Summary Tab to proceed to logger configuration.
GRAPH SETUP WINDOW