Wheatheart Transfer Auger - Manual (Page 27)

W HEATHEART M ANUFACTURING - T RANSFER A UGER 5. O PERATION
8”, 10”, & 13” 5.1. O PERATOR C ONTROLS
IM2 R2 27
5. Operation
5.1. OPERATOR CONTROLS
The transfer auger controls are located as shown in Figure 5.1. Please refer to
engine manual for engine controls.
Figure 5.1

Augers are available in various combinations. In most cases, the following
instructions will apply to all augers. Where the information varies, additional
instructions will be included, indicated by an arrow.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.