Wheatheart Transfer Auger - Manual (Page 33)

W HEATHEART M ANUFACTURING - T RANSFER A UGER 6. M AINTENANCE
8”, 10”, & 13”
IM2 R2 33
6. Maintenance
This unit has been designed and manufactured to meet the highest standards
while requiring minimal maintenance. Following a careful service and mainte-
nance program will provide many years of trouble-free service.
To reduce the risk of injury or death to people using this equipment, follow basic
safety precautions.
When performing adjustments, service, or repairs:
• Always take safety into consideration and note Section 2.5.
• Use extra caution when cleaning and servicing augers because flighting
edges can become sharp.
• Follow proper procedures when mounting a tire on a rim, see Section 2.9.
6.0.1. F
LUIDS
& L
UBRICANTS
E NGINE O IL
Refer to the engine operation manual for recommended oil usage.
G EAR O IL
Use SAE approved 90W or equivalent gear oil.
G REASE
Use SAE multi-purpose, high-temperature grease with extreme pressure (EP)
performance, or SAE multi-purpose lithium-based grease.
S
TORAGE
& H
ANDLING
Always follow manufacturer’s guidelines for safe and effective storage and
handling of lubricants.
Your machine can operate at top efficiency only if clean lubricants are used. Use
clean containers to handle all lubricants. Store them in an area protected from
dust, moisture, and other contaminants.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.