Wheatheart Transfer Auger - Manual (Page 34)

6. M AINTENANCE W HEATHEART M ANUFACTURING - T RANSFER A UGER
6.1. M AINTENANCE I NTERVALS 8”, 10”, & 13”
34 IM2 R2
6.1. MAINTENANCE INTERVALS
Details of service are listed in Section 6.2.
6.2. MAINTENANCE PROCEDURES
6.2.1. V ISUAL I NSPECTION
Before beginning the visual inspection, chock auger wheels and ensure that all
operators are aware of safety precautions.
When inspecting:
• Ensure all guards are in place, and in good working order.
• Examine the auger for damage or unusual wear.
• Inspect the machine for evidence of oil leaks.
• Examine hydraulic hoses and fittings for leaks and cracks.
• Be sure all safety decals are in place and are legible.
• ELECTRIC DRIVE: Check that drive belts are not frayed or damaged.
Ensure they are properly adjusted and aligned.
• Check that the discharge spout and intake area are free of obstructions.
• Ensure that intake housing fasteners are properly secured.
• Examine all flighting for damage or unusual wear.
Table 6.1
Time Period
Daily
(8000
BU)
Periodica
lly
(40
,000 BU)
An
nually
(Before S
to
rag
e)
An
nually
(Af
ter S
torag
e)
Visually inspect the unit.

Check engine oil level.

Check air filter.

Service belts.

Grease machine.

Check gearbox oil level (gas models).

Clean machine.

Service engine (gas & electric models).

Change gearbox oil.
