Great Plains ADC2350BE Operator Manual - Manual (Page 54)

50 ADC2350/E and ADC2350B/BE Table of Contents Index Great Plains Manufacturing, Inc.
167-085M Table of Contents Index 2012-08-01
Unloading Rear Hopper
15. Remove the right ladder. See “Removing the Right
Ladder” on page 32.
Refer to Figure 58 and Figure 59
16. Swing auger assembly out from cart and engage
mount lock pin . This prevents undesired
movement of the inner arm while positioning the
outer arm and auger tube
17. Swing auger under the meter box clean-out door of
the rear hopper. The clean-out door is the forward
door.
Refer to Figure 59 (which depicts the arm orientation when
the auger is positioned as shown in Figure 58)
18. Engage auger swing arm mount lock pin
and
swing arm joint pin .
Figure 58
Auger Under Rear Hopper
26357
1
Figure 59
Arm for Rear Unload
26354
1
2
1
2