Great Plains PT8030 Parts Manual - Manual (Page 6)

3
Assembly and Setup
10/14/08 PT6030 and PT8030 Pull-Type Planter 401-032Q
Great Plains Mfg., Inc.
2. Lower and back up slowly as shown below.
3. Block to a level position and remove chain.
15061
15062
15063
4. Attach hitch to frame as shown.
5. Remove shipping stands and brackets.
Row Unit Assembly
1. Disassemble row-unit springs (1) from mounting shaft
(2) by removing cotter pins and washers.
2. Hook springs into row-unit mount (3).
3. Turn eye-bolts (4) so they are just below the mounting
shaft (2), then turn eye-bolts back just enough so you
can assemble eye-bolts on mounting shaft (2).
4. Secure springs to mounting shaft using washers and
cotter pins.
15072
17790