Great Plains 3N-4025P Operator Manual - Manual (Page 164)

196-538M Table of Contents Index 2014-01-29
160 3N-40P Table of Contents Index Great Plains Manufacturing, Inc.
Options
Hitch Options
One hitch is selected upon initial order of a drill, and
includes the spring wire loop, safety chain, and all
fasteners. Additional hitches may be ordered for
conversion in the field, and include extra hitch mounting
bolts, lock washers and nuts.
Flat Fold Markers
Hydraulically-operated markers leave a visible groove to
use as centerline for the next pass.
The single marker mounts on the left side of the drill. The
dual markers mount on both sides, and include an
automatic sequence valve for operating alternate sides
on each pass.
Both marker include speed adjustments.
If ordered with a new drill, markers are factory-installed.
They may also be ordered later for field installation. Each
kit equips one drill.
Markers add weight to the drill, but only to the wing
section(s), and the full weight is on the wing only when
folded. The dual kit adds 1860 lbs (844 kg). The single kit
adds 930 lbs (422 kg).
Hitch Description Option
Part
Numbers
Large Strap (61) 170-038A
Clevis (62) 170-039A
Small Strap (63) 170-059A
Marker Kit Part Number
Single 113-769A
Dual 113-760A
.eps
100%
Figure 214: Options:
3N-40 Hitches
27061
1
2
3
1
2
3
.epsi
40%
Figure 215: Options:
Marker
20306