ADS Environmental Services Eureka2R QR 775019 A1 - Manual (Page 28)

ADS Eureka2R Leak Noise Correlator User Manual
24
Correlate
Correlate screen
The correlation (Correlate) screen main window displays the following, from
top to bottom:
 Total length under investigation
 Leak noise correlation along the length
 Pipe sections in proportion, with (where possible) the material and
length of each section
 Cursor
 Radio transmitter(s), with signal strength indication
 Cursor position from each sensor
 Status window showing the operating conditions
 Mode of operation
Adjust the cursor position using the left and right arrow keys. Use the Go to
Peak button to move the cursor directly to the point of best correlation.
The radio transmitter symbol flashes when no signal is available. When
operational, the number of waves displayed with the symbol represents the
signal strength. When one connection is made directly to an accelerometer or
hydrophone, a cable symbol displays in place of the blue radio symbol and no
signal strength displays for that channel.
The lower window displays the time and date, the elapsed time since
correlation began, and the battery status.